beautypg.com

Before startup, Start up – Karcher BR 47-35 ESC EU User Manual

Page 9

background image

English

9

Î

Remove all packaging material except
the wooden palette.

Î

Insert the pushing handle in the grooves
on the appliance.

Î

Fasten the pushing handle with the 4
screws enclosed in the packet.

Î

Fasten the covering flaps.

Î

Hang in the strain relief clamp at the
pushing handle.

Î

Lock the rear wheels; remove the wood-
en blocks used for stopping the wheels.

Î

Four indicated floor boards of the pallet
are fastened with screws. Unscrew
these boards.

Î

Place the boards on the edge of the pal-
let. Place the boards in such a way that
they lie in front of the four wheels of the
machine. Fasten the boards with screws.

Î

Slowly push the machine down from the
ramp.

Note
At the time of manufacturing the appliance,
it has already been flused using an anti-frost
agent. Before starting the machine for the
first time, you need to first remove the anti-
frost agent.
Î

Fill in 10 litres of fresh water in the fresh
water reservoir.

Î

Press the foot pedal.

Î

Set the machine switch to basic clean-
ing.

Î

Keep the machine running until the pres-
sure on the manometer falls.

ƽ

Danger

Risk of injury! The appliance can get stuck
and be dragged away by the travellator/ es-
calator. Before starting cleaning, check the
stepping areas and the ridge profile to see
that there are no deformations or any ob-
jects stuck therein. To be on the safer side,
make sure that you know where the emer-
gency switch-off button of the travellator/ es-
calator is located.
Î

Cordon off the travellator/ escalator as
long as cleaning operations are on and
the stepping areas are still wet.

Î

Switch on the travellator/ escalator.

Î

Ensure that the running direction of the
travellator/ escalator is away from the
machine.

Î

Check whether the combs and the guide
rails of the machine match the make of
the travellator/ escalator. Replace the
combs and the guide rails, if required.

Before Startup

Installing the pushing handle

Unloading

Removing anti-frost agents

Start up

Preparing the travellator/ escalator

Preparing the appliance

This manual is related to the following products: