Karcher PC 60-130 T - Manual (Page 16)

- 6
ƽ
Danger
Risk of injury! The main switch is to be switched off while carrying out any repairs or maintenance jobs.
1 Shavings sieve
Î Pull the shavings sieve out toward the
top and clean it under running water.
You can enter into a maintenance contract
with the concerned Kaercher Sales Office
for the machine.
ƽ Danger
Scalding danger! The detergent liquid must
have cooled down completely before drain-
ing it off.
Î
Open the drain-off tap on the lower side
of the device.
Î Drain off the detergent liquid.
Î Add new detergent liquid; see section
on start-up.
Î Turn off the appliance.
Î Turn the filter using a filter spanner.
Î Take out the filter inlay.
Î Clean or replace the filter inlay.
Î Install a new filter inlay.
Î Tighten the filter again.
Maintenance and care
Maintenance schedule
Time Activity Assembly affected Performance of whom
daily Check function Safety button Briefly open the machine hood with the machine
running (caution, steam!). The pump and the
turntable must switch off. If this is not the case,
turn the device off and inform Customer Service. Operator
Check filling level. Fill level indicator in the deter-
gent container
Refill water. Operator
Oil collection basin Dispose off the oil according to applicable regu-
lations. Operator
Check small
parts and shav-
ings sieve. Small parts and shavings sieve Clean small parts and shavings sieve. Operator
weekly or after 40
operating hours Visual inspection Hoses, pump. Check the hoses inside and outside of the ma-
chine and the pump for leaks.
Call customer service in case of leaks. Operator
Check filter (op-
tional). Filter after the pump. Install a new filter inlay. Operator
Check function Rotating plate Check the turntable for easy movement.
Call customer service in case of unsmooth
movement. Operator
Visual inspection Nozzles in the nozzle pipes. Replace damaged or worn out nozzles immedi-
ately. Operator
monthly or after 200
operating hours Check deter-
gent liquid. Water container, filter and noz-
zle pipes. Replace detergent fluid as required. Clean the
water container, filter and nozzle pipes. Operator
half-yearly or after
1000 operating
hours check, clean Entire device. Visual inspection of the device; check hoses and
connections to see that they are not leaky. Customer
Service
Clean the shavings sieve Maintenance contract
Maintenance Works
Replacing detergent liquid
Do not let the polluted detergent liquid
come untreated in contact with soil, water
or the sewage system. Please follow the
corresponding regulations in the respec-
tive country.
Cleaning the filter (optional)
16 EN