beautypg.com

Cleaning, Triple nozzle, Turning on the appliance – Karcher HDS 801 B User Manual

Page 20: Operating with cold water, Operating with hot water, Operation with detergent, Recommended cleaning method, After operation with detergent

background image

– 6

Set pressure/temperature and deter-
gent concentration according to the sur-
face to be cleaned.

Close the hand spray gun.

Turn the casing of the nozzle till the de-
sired symbol matches the marking.

Select round or flat spray using touch-less
switching:

Close the hand spray gun.

Turn the spray-pipe that is inclined
about 45° downward to the left or the
right.

Note: To prevent damage due to too much
pressure, always position high pressure ray
first from a greater distance towards object
to be cleaned.

Open the water supply.

Set the temperature regulator to opera-
tions with cold/ hot water.

Start the engine according to the oper-
ating instructions of the engine manu-
facturer.

Press the lever on the hand spray gun.

Set thermostat to "Burner off" position.

ƽ

Danger

Scalding danger!

Set thermostat to desired working tem-
perature. The burner is switched on.

Caution
Unsuitable detergents can cause damage
to the appliance and to the object to be
cleaned.

For considerate treatment of the envi-
ronment use detergent economically.

Observe the dosage and other instruc-
tions provided with these detergents.

Use only those detergents approved by
the manufacturer of the appliance.

Kärcher detergents ensure smooth
functioning. Please consult us or ask for
our catalogue or our detergent informa-
tion sheets.

Suspend end of suction hose in a con-
tainer filled with detergent.

Set nozzle to "CHEM".

Set dosing value for detergent to the
desired concentration.

Loosen the dirt:
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.

Remove the dirt:
Spray off loosened dirt with the high
pressure jet.

Set dosing value for detergent to "0".

Open the hand spray gun and rinse the
appliance for at least 1 minute.

Cleaning

Triple nozzle

High pressure flat spray (25°)
for large dirt areas
High pressure circular spray
(0°) for specially stubborn dirt

Flat low pressure spray
(CHEM) for operating using de-
tergents or cleaning at low
pressure.

Turning on the Appliance

Operating with cold water

Operating with hot water

Operation with detergent

Recommended cleaning method

After operation with detergent

20

EN

This manual is related to the following products: