beautypg.com

Water connection application – Karcher High Pressure Cleaners User Manual

Page 10

background image

– 2

stalled by an electrician in ac-

cordance with IEC 60364.

Never touch the mains plug

with wet hands.

Make sure that the power

cord or extension cables are

not damaged by running

over, pinching, dragging or

similar. Protect the cable from

heat, oil, and sharp edges.

The mains plug and the cou-

pling of an extension cable

must be watertight and must

never lie in water. Moreover,

the coupling may never lie on

the ground. The use of cable

reels that ensure that the

sockets are at least 60 mm

above the ground is recom-

mended.

Unsuitable electrical exten-

sion cables can be hazard-

ous. Only use electrical ex-

tension cables outdoors

which have been approved

and labelled for this purpose

and have an adequate cable

cross-section.

The power cord must be

checked regularly for damag-

es, such as cracks or aging. If

damage is found, the cable

must be replaced before fur-

ther use.

When replacing couplings on

the power cord or extension

cable, the watertightness and

the mechanical resistance

must remain ensured.

Do not clean the appliance

with a water hose or high-

pressure water jet (danger of

short circuits or other dam-

age).

Do not operate the appliance

at temperatures below 0 °C.

Notice

Operating procedures create

short term power sinkings.

During unfavorable net condi-

tions other devices might be

disturbed.

With a net impedance lower

then 0,15 Ohm no disturbanc-

es are to be expected.

ƽ

Danger

The high pressure hose must

not be damaged. A damaged

high pressure hose must be

replaced immediately. Only

hoses and joints recommend-

ed by the manufacturer may

be used. See Operating In-

structions Manual for Order

Number.

Please ensure that screw

connections of all hoses are

not leaky.

Warning

Please observe the safety in-

structions of your water sup-

ply authority.

ƽ

Danger

The appliance and its working

equipment must be checked

to ensure that it is in proper

working order and is operat-

ing safely prior to use.

Water connection

Application

10

EN