Haltech Platinum PRO PLUG-IN Honda S2000 AP1 (HT055050) - Manual (Page 14)

Notes
PLATINUM Pro Plug-in Honda S2000 AP1
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into
a vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual is included in the software which can be
downloaded from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Honda S2000 AP1 ECU supports the following:
• Honda S2000 AP1- F20C / 6 speed Manual
Platinum Pro Plugin Honda S2000 AP1 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• USB Cable
• Software CD
• Quick Start Guide
• Haltech Sticker
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
Loaded Base map
Your Platinum Pro Plug-in has been programmed with a base map to suit a
Honda S2000 AP1 running a F20C engine using the standard MAP sensor.
Please ensure that you load, modify and check the corresponding basemap for
your application before attempting to start the vehicle.