Haltech Platinum PRO PLUG-IN Mitsubishi Evolution 9 2005 - 2007 (HT055064) - Manual (Page 3)

Notes PLATINUM Pro Plug-in Mitsubishi Evo 9
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro Plug-in ECU
into a vehicle. This guide is accompanied by the full service manual located on the
software CD provided with the ECU that you or your tuner will need to refer to before
completing your installation and configuration. The Manual can also be downloaded
from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Mitsubishi Evo 9 ECU supports the following vehicles:
• Mitsubishi Evolution 9 (JDM, USA, AUS & RHD Euro models only)
• Mitsubishi Evolution 8 MR (JDM, AUS & RHD Euro models only)*
*Not suitable for USA spec EVO 8 MR
Platinum Pro Plug-in Mitsubishi Evo 9 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• Haltech Mounting Screws with Captive Nuts x 2
• USB Cable
• Software CD
• Quick Start Guide
• Haltech Sticker
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
Loaded Basemap
Your Platinum Pro Plugin has been programmed with a basemap to suit a
Mitsubishi Evolution 9 2.0L 4G63 standard engine using the on-board MAP sensor.
Please make sure you connect the Haltech ECU Internal MAP sensor to the intake
manifold prior to starting the vehicle.
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle.