Haltech Platinum PRO PLUG-IN Nissan Silvia S15 / 200SX (HT055012) - Manual (Page 4)

ECU Installation
To install your new Platinum Pro Plug-in to your Nissan Silvia S15, please follow the
procedures below.
* Please Note the following Installation photos based on a Nissan Silvia S15, Spec R.
You will require the following tools
• Screwdriver Small Flat
• Socket set with 10mm socket
• Cable Ties / 3M Velcro tape or similar
1. Locate your factory ECU. This will be located on the left hand side A pillar, behind the
kick panel. Remove the kick panel to access the ECU.
Figure 1 – Left hand side kick panel showing ECU Location
ECU Pinout
Figure 11 – Platinum Pro Plug-in Nissan S15 ECU Pinout