Haltech Platinum PRO PLUG-IN Nissan Silvia S15 / 200SX (HT055012) - Manual (Page 14)

Notes
PLATINUM
Pro Plug-in Nissan Silvia S15 / 200SX
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into
a vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual is included in the software which can be
downloaded from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Nissan Silvia ECU supports the following:
• Nissan Silvia/200SX S15
Platinum Pro Plugin Nissan Silvia S15 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• USB Cable
• Software CD
• Quick Start Guide
• Haltech Sticker
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
• 3 Bar Map Sensor ( HT010104 )
• Air Temperature Sensor ( HT010200 )
Loaded Basemap
Your Platinum Pro Plug-in has been programmed with a basemap to suit a
Nissan Silvia S15 running a SR20DET engine using the standard MAF sensor.
Alternatively, a basemap using the Haltech ECU Internal MAP Sensor as a load
reference is available in the following folder for you to upload into your ECU:
C:\Users\XXXX\Documents\Haltech\ECU Maps\Nissan\S15
Please make sure you connect the Haltech ECU Internal MAP sensor to the intake
manifold prior to starting the vehicle.
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle.