Haltech Platinum PRO PLUG-IN Nissan Skyline R34 GT-t (HT055105) - Manual (Page 3)

Notes PLATINUM Pro Plug-in Nissan Skyline R34 GT-t
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into
a vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual can also be downloaded from the
Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Nissan Skyline R34 GT-t ECU supports the following:
Nissan Skyline R34 GT-t – RB25DET, RB25DE, RB20DE (manual transmission only)
(R34 GT-t Traction Control currently not supported, TCS Warning lights will illuminate)
Nissan Stagea WC34 Series – RB25DET (manual transmission only)
Platinum Pro Plugin Nissan Skyline R34 GT-t Kit Includes
• Haltech Platinum Pro Plug-in ECU
• USB Cable
• Software CD
• Quick Start Guide
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
• 3 Bar Map Sensor ( HT010104 )
• Air Temperature Sensor ( HT010200 )
Loaded Basemap
Your Platinum Pro Plug-in has been programmed with a basemap to suit a
Nissan R34 GT-t running a RB25DET engine using the standard MAF sensor.
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle