Haltech Platinum PRO PLUG-IN Nissan Skyline R34 GT-t (HT055105) - Manual (Page 13)

ECU Installation
To install your new Platinum Pro Plug-in to your Nissan Skyline R34 GT-t, please follow the
procedures below.
You will require the following tools
• Screwdrivers Phillips No 1 & No 2 , Small Flat
• Socket set with 10mm socket
• Cable Ties / 3M Velcro tape or similar
1. Locate your factory ECU. This will be located on the left hand side A pillar, behind the
kick panel. Remove the kick panel to access the ECU.
Figure 1 – Left hand side kick panel showing ECU Location
ECU Pinout
* Denotes Function Not Available
Figure 10 – Platinum Pro Plug-in Nissan Skyline R34 GT-t ECU Pinout