Haltech Platinum PRO PLUG-IN SUBARU MY 01-05 (HT055174) User Manual
Page 5
The
Haltech CAN Network
The Haltech CAN network allows for simple and effective expansion in ECU capability
and functionality without having to go to the trouble of wiring in a whole new computer.
Expansion is made possible by the addition of multiple expansion devices that
communicate to the main ECU via a Control Area Network (CAN).
Installation time and costs are kept to a minimum as all expansion devices are
powered up from the main ECU via the pre-terminated connection cable that comes
with each expansion device.
Simply connect the device directly to the 8 pin CAN connector on the rear of the ECU
or connect using an optional Haltech CAN Hub (order as part # HT059990) if multiple
expansion devices are required).
Each expansion device is pre-programmed with a unique ID code which allows it to
be recognised on the network and work correctly first time every time.
For current available expansion devices please go to our website at
Figure 9 – Haltech ECU connected to a Racepak Dash
Figure 10 – Haltech ECU connected to 5 Auxiliary CAN based devices
2.
With the ignition turned off, remove the 2 nuts securing the ECU to the vehicle.
Disconnect the 5 main harness connectors from the front of the ECU
Remove ECU from vehicle.
Figure 3 – Factory ECU mounted in vehicle
3.
Fit the Haltech Pro Plug-in ECU to the vehicle making sure that you connect
the USB Cable and auxiliary plug (if required), the USB cable can be routed up
into the glove compartment for access and storage. Secure the Haltech ECU
to the mounting bracket using double sided tape and cable ties.
Figure 4 – Haltech ECU Mounted to Factory ECU Mount