Haltech Platinum PRO PLUG-IN SUBARU MY 01-05 (HT055174) - Manual (Page 3)

Notes
PLATINUM Pro Plug-in Subaru MY01-05
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into
a vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual is included in the software which can be
downloaded from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Subaru MY01-05 ECU supports the following vehicles:
• Subaru WRX MY01-05 JDM,USDM,ADM
• Subaru WRX STI MY01-05 JDM,ADM
Supported Engine Code
• EJ20
Platinum Pro Plugin Subaru MY01-05 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• Rear Auxiliary Connector and pins
• USB Cable
• Software CD
• Quick Start Guide
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
• 3 Bar Map Sensor ( HT010104 )
• Air Temperature Sensor ( HT010200 )
Loaded Basemap
Your Platinum Pro Plug-in ECU has been programmed with a basemap to suit a
Subaru WRX running a EJ20 engine using the standard MAF sensor.