Ferguson Ariva HDplayer 310 - Manual (Page 14)

10
router
ENGLISH
Connections
Optional: Connecting Ethernet
network
Ethernet 100Mb network
A
Connect the Ethernet RJ-45 cable to LAN
port as shown on the above illustration.
B
Wait a moment until DHCP will configure
network connection.
Helpful hints:
 If there is no DHCP server in your network
you can manually configure Ariva IP
address - “Fix IP (manual)” menu item.
Optional: Connecting WiFi network
WiFi 802.11g/n network
IMPORTANT!

You need dedicated WiFi USB dongle
for wireless connection. This dongle
is optional accessory and may be sold
separatly.
A
Connect dedicated WiFi USB dongle
to USB port as shown on the above
illustration.
B
Enter “Setup” > “Network” > “Wireless
Setup”
C
Select one of detected networks and
enter valid key.
Helpful hints:
 If you don’t have WiFi router select “Peer
to Peer (Ad-Hoc)” , then configure settings
(SSID, WEP key, Ariva IP address)
 WiFi networks are usually slower than
cable (Ethernet) networks. It may affect
playback performance.