Ferguson FK-7000 - Manual (Page 28)

13.6 Conditional access
In this menu you can obtain additional information about the subscriber's card in the card
reader. The information presented depends on the type and version of your card. Card initial
clock is by default is set to 3,6MHz.
13.7 Updating by RS232
This menu allows you to send software, settings or channel
lists from one receiver to another receiver of the same type.
Connect the receivers using an RS232 Null Modem cable.
Select allcode in order to send all of the software, or userdb
to send only current settings and the channel list.
28