Ferguson Ariva 252Combo - Manual (Page 16)

9.6 Connection of another receiver
Another receiver may be connected through the LNB OUT socket. Please keep in mind,
however, that only one device may be used at one time! Permanent damage may result if both
are turned on simultaneously.
NOTE: LOOP OUT in all Combo receivers is the only signal loop-through. This is not a
modulator, so the receiver will not let go of the image decoding (DVB-T and USB) in the
form of an analog signal on this connector.
9.7 Connection to the LAN local network
In order to connect the receiver to a local network, use an RJ45 cable. We recommend that you
restart the receiver whenever the network settings are changed.
16