Ferguson Ariva 252Combo - Manual (Page 11)

5.1. CAM module and subscriber's card
Inserting the module and subscriber's card
The conditional access module resembles a PC card (known as the PCMCIA) for laptop
computers. There are different types of CI modules, suitable for various encoding systems.
1. First, turn off the receiver.
2. Insert the subscriber's card into the conditional access
module.
3. Open the tab on the front panel and insert the CI CAM
module, forcing it home into the socket on the right side of the
front panel. If you want to remove the CAM module, press the
black button next to the CAM socket.
4. After correctly inserting the module, turn on the receiver.
From now on you will be able to watch coded television channels
available through this module and card.
Note: Check whether the subscriber's card has been correctly
inserted into the module. Incorrect insertion of the card may
cause damage to the conditional access module.
Warning: Do not attempt to remove or insert the module and/or
card when the receiver is turned on!!!
6. Rear panel
Depending on your receiver has inputs / outputs as shown below:
52E 102mini
102E /
103
202E /
203
150Combo
152Combo 250Combo
252Combo
LNB IN   
/

/  
LNB-OUT - -  /  /-  
ANT IN - - -/- -/-  
LOOP-OUT - - -/- -/-  
HDMI    /  /  
LAN - 

/

/  
USB 1 1 1/2 2/2 2 2
SCART  -  /  /  
2x RCA analog audio - -

/-

/-  
1 x RCA video (cvbs) - - -/-

/- - -
1 x SPDIF  -

/

/- - -
1 x OPTICAL - - -/- -/  
RS232  

/

/  
ON/OFF power button - -

/-

/-  
11