Connecting the receiver – Ferguson Ariva 252Combo User Manual
Page 13
9. Connecting the receiver
The following illustrations show cable connections for a television and other devices connected
with the receiver. If you require any assistance in connecting individual devices, contact your
local technician. Before connecting or altering cabling, disconnect the receiver from the
mains !!!
Note: Availability and type of connection depends on your receiver model! Not all of the
connections are applicable for your receiver!
9.1 Connection by means of an HDMI cable (recommended)
1. Connect the antenna to the LNB IN socket of the receiver.
2. Connect the HDMI to the receiver out and the television in.
Connection by means of an HDMI cable allows you to obtain the highest image quality.
If you have an amplifier with an HDMI out and in, which supports sound sent over
HDMI,
connect the devices by two HDMI cables. As in the following figure: one cable to
the
amplifier, and the other from the amplifier to the television set.
13