Ferguson Ariva Link 100 - Manual (Page 24)

15.4 Fastscan
Satellite Select a satellite.
Search Select a fast scan search option.
Channel list
Select to add the searched channels to the channel list (end) or to
replace the searched channels.
Search
Press (blue) key to start the search.
15.5 Transponder search
Satellite Select a satellite.
Frequency Select the frequency or insert a new one.
Symbol rate Insert the symbol rate.
Polarization Select the polarization (horizontal/vertical).
DVB Select the transmission (DVB-S/DVB-S2).
Modulation Select the modulation for DVB-S2 (QPSK/8PSK).
FEC Select the FEC value for DVB-S2. For DVB-S select auto.
Pilot Select the Pilot function for DVB-S2.
Search
Press (blue) key to start the search.
Search options Select an option (FTA/NIT/Transponder) to start the search.
Edit
Press (red) key to edit a transponder.
Save Press MENU key to save the edited/new transponder.
15.6 DiSEqC/USALS-Multi search
Satellite Select the installed satellites (DiSEqC switch, DiSEqC 1.2 motor/USALS
motor) with the p/q/OK keys.
Search
Press (blue) key to search all selected satellites at one time.
15.7 Edit PID
Satellite Select a satellite.
Transponder Select a transponder.
Channel Rename/name the channel.
Video PID Enter the Video PID.
Audio PID Enter the Audio PID.
PCR PID Enter the PCR PID.
Save Press MENU key to save the changes.
15.8 DiSEqC 1.2
Satellite Select a satellite.
Transponder Select a transponder.
Go to position Press OK key to move the motor to the stored position.
Move
Press the t/u (West/East) keys to move the motor to the desired
position/limits.
Steps Select the motor steps (1-127).
Move in steps Press the t/u(West/East) keys to move the motor in the selected
steps.
Save position Save the selected satellite position.
Save limits & options
East/West limit Select this option to save the limits.
Delete Select this option to delete the stored limits.
Recalculate Select this option to recalculate the positions of the satellites based
on one satellite position and to re-adjust them.
Go to center Select this option to move the motor to the center.
Save Press MENU key to save the Motor settings and enter the Satellite
search menu to start the search.
Search
Press (blue) key to search all selected satellites at one time.
24