Connecting the satellite receiver – Ferguson Ariva Link 100 User Manual
Page 13
9. Connecting the satellite receiver
The following illustrations show cable connections for a television and other devices connected
to the receiver. If you require any assistance in connecting individual devices, contact your local
technician. Before connecting or altering connections, disconnect the receiver from the mains !!!
9.1 Connecting to the TV via HDMI cable (recommended)
1. Connect the antenna to the LNB IN socket of the receiver.
2. Connect the HDMI to the receiver out and the television in.
Connection by means of an HDMI cable allows you to obtain the highest image quality.
If you have an amplifier with an HDMI out and in, which supports audio over HDMI,
connect the devices by two HDMI cables. As in the following figure: one cable to the
amplifier, and the other from the amplifier to the television set.
13