Ferguson Ariva Link 100 - Manual (Page 15)

For USB memory devices formatted in NTFS your receiver can only playback files
(movies, MP3s, pictures). Recording is not possible.
9.5 Connecting another receiver
Another receiver may be connected through the LNB OUT socket. Please keep in mind, however,
that only one receiver may be used at any one time! Permanent damage may result if both are
turned on simultaneously.
9.6 Connecting to the local network (LAN)
PSTN Modem: RJ11 connector – The receiver has a built-in modem to connect to an analog
PSTN telephone line. Modem enables two-way communication in order to gain access to the
Internet and has the function of interactive exchanges. Connect your receiver to the network
with a Telephone cable.
Ethernet: RJ45 connector - Connect your receiver to the network with an Ethernet cable.
To operate all features of your receiver connect your receiver to your network via a
Router which is connected to the Internet. If you cannot connect to your network or if
‘ Connection failed!’ is displayed for network features check again the address and the
network connection and try again.
15