Asus K8V-MX - Manual (Page 60)

2-24 Chapter 2: BIOS Information
2.5.5 APM Configuration
Power Management/APM [Enabled]
Power Button Mode [On/Off]
Suspend Power Saving Type [C3]
Restore on AC Power Loss [Last State]
Standby Iime Out [Disabled]
Resume On Ring [Disabled]
Power On Lan [Disabled]
Power On PME [Disabled]
Power on PS/2 KeyBoard [Disabled]
Power on PS/2 Mouse [Disabled]
Power on OnBoard Lan [Disabled]
Enable or disable
the Advanced Power
Management (APM)
feature.
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM) feature.
Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power button
is pressed. Configuration options: [On/Off] [Suspend]
Suspend Power Saving Type [C3]
Allows you to set the suspend power saving type. Configuration options: [C3] [S1]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state whatever was the system
state before the AC power loss. Configuration options: [Last State] [Power Off]
[Power On]
Standby Time Out [Disabled]
Allows you to select the specified time at which the system goes on suspend
mode. Configuration options: [Disabled] [1 Minute] [2 Minutes] [4 Minutes]
[8 Minutes] [10 Minutes] [20 Minutes] [30 Minutes] [40 Minutes] [50 Minutes]
[60 Minutes]
The following items appear only when the Power Management/APM item is set
to [Enabled].
v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit