Asus K8V-MX - Manual (Page 54)

2-18 Chapter 2: BIOS Information
USB 1.1 Ports Configuration [USB 8 Ports]
Allows you to set the number of USB ports to activate.
Configuration options: [Disabled] [USB 2 Ports] [USB 4 Ports] [USB 6 Ports]
[USB 8 Ports]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB devices at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled. Configuration options: [Auto] [Disabled] [Enabled]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller to HiSpeed (480Mbps) or FullSpeed
(12Mbps). Configuration options: [HiSpeed] [FullSpeed]
When you use a USB mass storage device, a USB mass storage device
configuration option will display. And this option is hid if no USB mass storage
detected.
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Device #1USB Flash Disk
Emulation Type [Auto]
Device #2USB Flash Disk
Emulation Type [Auto]
Enables 1.1 USB
host controllers.
v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit