AT&T 9357 - Manual (Page 24)

21
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Connect with the Answering System
You can access many features of this system remotely from a touch tone
phone.
1 Dial your telephone number.
2 When the system answers, press
#, then enter your
Remote Access Code (preset to 19). The system beeps twice.
3 Within two seconds, enter a remote command (see “Remote
Access Commands”).
4 Press
* 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
* 5 to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function: Command:
Play messages in Press
#, then the appropriate mailbox
a mailbox number ( 1, 2, or 3). The system plays
new messages. If there are no new
messages, the system plays old messages.
Repeat a message Press
# 4 while message is playing;
each press backs up another message.
Skip a message Press
# 6 while message is playing;
each press advances another message.
Stop Press
# 5.
Save messages Hang up.
Delete message Press
# 9 while message is playing.
Review announcement Press
# 7; system plays announcement,
then beeps.
Record announcement Press
* 7; after beep, record
announcement, press
# 5 to stop.
System plays back announcement.
9357_book/wc_1ATT 7/6/01 4:10 PM Page 21