AT&T 9357 - Manual (Page 14)

11
4 When you finish entering the name, press
s. The screen
displays ENTER NUMBER.
5 Enter the telephone number. Use
< to backspace and make
a correction. Press
r to store a pause in the dialing
sequence.
6 Press
s to store your entry. The screen displays SAVING…
and you’ll hear a series of beeps confirming the entry.
Note: When memory is full the screen displays MEMORY FULL, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit Numbers Stored in Memory
1 Press
> (DIR). The screen displays DIRECTORY.
2 Press
< or > to scroll alphabetically through numbers
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
3 When the screen displays the number you want to edit, press
s.
Then press
< or > until EDIT flashes.
4 Press
s. The screen displays the name and number. The flashing
cursor appears at the end of the name. Use
<, > and the dial
pad keys to edit the name. Press
s to move on to edit the
number.
5 Press
s to save the edited information. You’ll hear a series of
beeps confirming the change.
DIAL E ED DI IT T ERASE
973-555-0123
5/01 5:40
PM OLD
28
TELEPHONE MEMORY
9357_book/wc_1ATT 7/6/01 4:10 PM Page 11