ROTHENBERGER ROSPEED 3F User Manual
Page 18
14
ENGLISH
2
Technical data
Dimensions (width x depth x height in mm):... 500 x 600 x 745 or 1130
Empty weight:................................................ approx.32 kg
Screw type : ................................................... ∅16mm screw x 15 metres (item no: 7.2918)
Max. screw length in the drum:...................... 15m
Max. working length:..................................... 30 metres with ∅16mm screw (optional)
Working area/tube diameter: ......................... ∅50 to ∅125 mm with 16mm screw
Noise emission: .............................................. 75 dB (A)
Speed of the screw: ....................................... approx. 4-5 m/min (Depending on the pipe run)
Rotational direction:....................................... left (view from the front of the drum)
Power P1 / P2:................................................ 0.25 KW / 0,4 KW
Power supply: ................................................ 7.2960: 230V, 50-60 Hz, 7.2965:110-115V,
50-60Hz
Protection class: ............................................. I
Degree of protection:..................................... IP X4
Short-time operation:..................................... 15 min
3
Function of the equipment
3.1.1 Equipment
overview
A
1 Carrier
handles
7 Feed
handle
2 Tube
framework
8 On / Off switch
3 Drain
plug
9 Control panel
4 Screw holding device
10 Securing
pin
5 Pressure
transducer
11 Tool
box
6 Guide
hose
12 Rubber
feet
3.1.2 Description of machine function
The machine operates with an automatic feed which can be set by means of the pressure
transducer (5). The feed handle (7) serves to infinitely adjust the forward and reverse
movement of the screw.
With the machine there is a choice of three setting modes in the control panel (9):
Scrubbing mode, pulsing and smooth mode.
Should there be a tube opening which lies above the outlet of the screw drive then the
machine can also be operated lying on its back.