ROTHENBERGER ROSPEED 3F - Manual (Page 17)

ENGLISH 13
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away rom moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of these devices can
reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed. Use of
the power tool for operations different from those intended could result in a hazardous
situation.
5) Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
1.3 Safety information
Only work on perfect electric cables which have been installed according to VDE guidelines.
During the cleaning operation rubber boots (insulation) are to be worn.
The screw should never be run without the guide hose!
Mechanical tube cleaning should always be carried out from above and directed downwards into
the obstruction!
Ensure that during the tube cleaning operation there is no activation of any water tap to the
tube being cleaned. This could lead to a water build up!
During tube cleaning never allow the machine to be run without supervision.
Safety guards: all revolving parts are guarded by safety covers. Removal of these safety
guards and/or operation of the equipment without these guards is strictly prohibited.
Guide hose: The guide hose acts as a guard for the revolving screw and facilitates a
precise insertion of the screw into the tube prior to cleaning.