ROTHENBERGER R 140 B User Manual
Page 18
16
ENGLISH
4.
Help in case of problems
Problem
Possible cause
Remedy
Machine does not run
No benzine
Re-filling benzin
fuel tap is closed
Open fuel tap
Motor faulty
Call Customer Service
Spiral does not rotate when
the hand-lever has been
operated.
Clamping jaws worn
Drive belt worn
Replace clamping jaws
Replace drive belt
5.
Care and Maintenance
5.1 Care
The equipment should be handled with care and cleaned regularly.
After every use the screws and tools should be cleaned and treated. We recommend our special
cleaning agent „ROWONAL“.
Care and maintenance of the gasoline motor must be according to the specifications of the
manufacturer. After five operating hours the first oil change is necessary. For other oil changes use
the same oil type. Changing of the air filter must be according to the specifications of the
manufacturer.
The machine has a lubricating point (S) at the drive shaft in the area of
the clamping jaws, which has to be lubricated using a universal grease
after ten hours operation in each case. In general, all mobile parts in the
area for stressing the clamping jaws are to be cleaned regularly.
5.2
Maintenance and Repair
Important! All maintenance and repair work should only be carried out by experienced
service personnel.
The ROTHENBERGER service agents or the manufacturer’s own repair department are always
available to help you. We will also of course send you spare parts immediately. Contact your local
dealer or the manufacturer.
You can order accessories and spare parts at your local dealer or through our After Sales Hot-Line
Service.
Tel.
+49 6195 800 8200
Fax:
+49 6195 800 7491