ROTHENBERGER Wasserdruckbehälter - Manual (Page 7)

ENGLISH 5
Safety instructions
 Children and adolescents who have not been properly instructed must not use the device.
 Keep water pressure tanks out of the reach of children.
 Take precautions to prevent hazardous substances from being misused.
 Repairs and modifications to the tank are not permitted.
 The effect of the safety valve must not be bypassed or made inoperative.
 Contact between water pressure tank materials and hydrogen peroxide or other agents which give off
oxygen may result in increased pressure similar in nature to an explosion. Never place such agents in
the device.
 Have damaged parts or parts that do not work properly repaired immediately by our customer service
department or by service partners authorized by us.
 Make certain the device is not heated beyond the maximum operating temperature. Do not allow the
device to remain under pressure and/or exposed directly to sunlight.
 Empty tank daily after use, never leave residue in the tank.
 Use only ROTHENBERGER spare and accessory parts. We cannot assume any liability resulting from
the use of third-party parts!
 Wear suitable protective equipment when working with hazardous substances.
 When pumping, always observe the pressure gage to ensure the maximum operating pressure 6 bar is
not exceeded.
 Before filling, after use and before maintenance work, allow the residual pressure in the tank to
dissipate completely.
Technical data
Max. filling amount...........................10 l
Total contents...................................13,5 l
Max. operating pressure ...................6 bar
Max. operating temperature .............+ 40 °C
Weight when empty .........................ca. 5,2 kg
Material of tank ................................Steel with coating
Technical residual quantity ................
< 0,04 l
Scope of delivery: Tank with pump, hose and instructions for use.
Proper usage
The water pressure tank is designed for supplying drills, concrete saws, cut-off grinders, etc. with cooling
and rinsing liquids, usually water.
Failure to comply with the mentioned conditions will lead to cancellation of the guarantee.
Overview A
1 Tank 3 Hose 5 Pressure gage
2 Pump/pump handle 4 Safety valve