Options while on calls, Volume control, Mute – AT&T DECT 6.0 EL52201 User Manual
Page 25: Flash/call waiting, Volume control mute flash/call waiting

20
Telephone operation
Options while on calls
volume control
While on a call, press
DIr
/vOLumE to increase or
CID
/vOLumE to decrease the listening volume.
When the volume reaches the minimum or maximum
setting, you hear two beeps.
note: The handset volume setting (1-5) and speakerphone volume
setting (1-6) are independent.
mute
Use the mute function to turn off the microphone while on a call. You can
hear the caller, but the caller cannot hear you.
To turn mute on:
Press
muTE/
DELETE
. When mute is on, the handset screen
shows
muTED for a few seconds and the muTE icon
appears until you turn off mute.
To turn mute off:
Press
muTE/
DELETE
and then resume speaking. When
mute is off,
mICrOpHONE ON appears temporarily on
the handset screen.
-Or-
Mute is automatically canceled when you end the call.
Flash/call waiting
If you subscribe to call waiting service provided by your telephone service
provider, you hear a beep if someone calls you while you are already on
a call.
Press
pHONE
/FLAsH to put your current call on hold
and take the new call.
Press
pHONE
/FLAsH anytime to switch back and
forth between calls.
note: For more information on caller ID with call waiting, refer to
About caller ID on page 33.
•
•
•
•
10:30
PM
MUTE
11/20
MUTED