Indesit IF-88-K-GP.A-IX-S - Manual (Page 30)

30
GB
Safety devices
• The icon on the display, when lit, indicates that
the oven door was automatically locked as soon as the
temperature reached a high value.
• The icon indicates that the cleaning cycle may
be cancelled at any time by pressing the button.
• If a malfunction occurs, the heating elements will be
switched off.
• Once the oven door has been locked, you cannot change
the duration and cycle end time settings.
Programming the automatic cleaning end time
1. Press the button until the icon and the two digits
on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards “ ” and “ ” to adjust the
hour value.
3. Press the
button again until the other two digits on the
DISPLAY begin to flash.
4. Turn the TIMER KNOB towards “ ” and “ ” to adjust the
minute value.
5. Press the
button again to confirm.
6. When the set time has elapsed, the text END appears on
the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO)
AUTOMATIC CLEANING level has been selected, with
the default duration of 1 hour. 12:30 is scheduled as the
end time. The programme will start automatically at 11:30
a.m.
Programming has been set when the and buttons are
illuminated. The display shows the AUTOMATIC CLEANING
end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven
has cooled down sufficiently before you can open the oven
door. You will notice some white dust deposits on the bottom
and the sides of your oven; remove these deposits with a
damp sponge once the oven has cooled down completely.
Alternatively, you can make use of the already heated oven,
in which case it is not necessary to remove the deposits,
they are completely harmless and will not affect your food
in any way.