Nikon LS-2000 - Manual (Page 29)

19
3. Setup
Nikon LS-2000 35 mm Film Scanner User’s Guide
Windows
At start-up, Windows will detect the LS-
2000 and display the dialog shown at left.
Insert the Nikon Scan CD in the computer’s
CD-ROM drive, confirm that the
Driver
from disk provided by hardware
manufacturer
radio button is selected,
and click OK . When the “Install from
Disk” dialog appears, enter the drive
letter of the CD-ROM drive in the Copy
manufacturer’s files from textbox
and click OK . Windows will then
register your scanner on the system.
Once the scanner has been registered, the Welcome dialog for the
Nikon Scan installer will appear on the desktop (the Welcome
dialog for scanners sold in the U.S.A. differs from that shown
below; see the reference manual for details).
Click Nikon Scan 2.0 . If your scanner was purchased outside the
U.S.A., you will be prompted to choose a language for Nikon
Scan’s menus and dialogs. Installation can now be completed by
following the instructions provided by the installer (see the Nikon
Scan for Windows Reference Manual for details).