American DJ Flight-Moon - Manual (Page 2)

©
American DJ
®
- www
.americandj.com - Flight Moon™ Instruction Manual Page 3
•
Micro-Stepping Motors for Smooth Color
T
ransitions
•
DMX-512 Protocol Compatible (Uses 2 DMX Channels)
•
Full Manual Focusing
•
Fan
Cooled.
•
7 Colors Plus White
•
Master/Slave Operation
•
Internal Microphone with V
olume Sensitivity Knob
•
Easy Lamp Replacement
•
ZB-JCR H5 15v/150w Lamp
•
V
ariable Speed Strobe Function
•
Optional FlightMoon/C Remote Controller
Flight Moon™
Featur
es
The
Flight
Moon™
carries
a
one
year
(365
days)
limited
warranty.
Please fill out the enclosed warranty card to validate your purchase. All
returned
service
items
whether
under
warranty
or
not,
must
be
freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American DJ
® customer support
for a R.A. number. Flight Moon™
Pr
oduct Registration
•
To
reduce the risk of electrical shock or fi
re, do not expose this unit
rain or moisture
•
Do not spill water or other liquids into or on to your unit.
•
Be sure that the local power outlet match that of the required voltage for your unit.
•
Do not attempt to operate this unit if the power cord has been frayed or broken.
•
Do not attempt to remove or break of
f the ground prong from
the electrical cord.
This prong is used to reduce the risk of electrical
shock and fi
re in case of an internal short.
•
Disconnect
from main power before making any type of connection.
•
Do not remove the cover under any conditions.
There are no user
serviceable parts inside.
•
Never operate this unit when it’
s
cover is removed.
•
Never plug this unit in to a dimmer pack
•
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall.
•
Do not attempt to operate this
unit,
if
it
becomes damaged.
•
This unit is intended for indoor use only
, use of this product outdoors
voids all warranties.
•
During long periods of non-use, disconnect the unit’
s main power
.
•
Always mount this unit in safe and stable matter
.
•
Power-supply cords should be routed so that they are not likely to be
walked
on
or
pinched
by
items
placed
upon
or
against
them,
paying
particular
attention
to
cords
at
plugs,
convenience
recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer
. See page 7 for cleaning details.
•
Heat
-The
appliance
should
be
situated
away
from
heat
sources
such as radiators, heat registers, stoves, or other appliances (includ- ing amplifiers) that produce heat.
•
The fixture should be serviced by qualified service personnel when:
A.
The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C.
The appliance has been exposed to rain or water
.
D.
The appliance does not appear to operate normally or exhibits a
marked change in performance.
Flight Moon™
Safety Pr
ecautions
©
American DJ
®
- www
.americandj.com - Flight Moon™ Instruction Manual Page 4
To
optimize the performance of this product, please read these operat- ing instructions carefully to familiarize yourself with the basic operations of this unit.
These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. Flight Moon™
General Instructions
Flight Moon™
Contents
Introduction.........................................................................................3 Customer Support.................................................................................3 Product Registration..............................................................................4 Features..................................................................................................3 DMX T
raits............................................................................................3
Set-Up...............................................................................................................3 Lamp
&
Fuse
Replacement.....................................................................3
Specifications........................................................................................3 Optional Foot Switch..............................................................................3