Asus M2V-TVM - Manual (Page 66)

2-26 Chapter 2: BIOS Setup
2.5.3 APM Configuration
APM Configuration
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On Ring [Disabled]
Power On PME# [Disabled]
Power On By KBC [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On By RTC Alarm [Disabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off ]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power
loss. When set to Last State, the system goes into either off or on
state whatever the system state before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On Ring [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On PME# [Disabled]
Allows you to enable or disable the PME#-wake up feature.
Configuration options: [Disabled] [Enabled]