Asus M2V-TVM - Manual (Page 61)

ASUS M2V-TVM 2-21
Hyper Transport AGP Configuration
(K8/NPT) to (AGP) Freq Auto [Enabled]
Hyper Transport AGP Configuration
Hyper Transport AGP Configuration [Enabled]
Allows you to enable or disable the K8/NPT to AGP frequency selection by
CPU capability. Configuration options: [Enabled] [Disabled]
2.4.4 Onboard Devices Configuration
Serial Port1 Address [3F8/IRQ4]
Serial Port1 Mode [Normal]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
OnChip SATA-IDE [IDE]
AC’97 Audio [Enabled]
Onboard LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port1 Mode [Normal]
Allows you to select the Serial Port1 mode.
Configuration options: [Normal] [IrDA] [ASK IR]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Mode [Normal]
Allows you to select the Serial Port2 mode.
Configuration options: [Normal] [IrDA] [ASK IR]