Asus M2V-TVM - Manual (Page 56)

2-16 Chapter 2: BIOS Setup
Legacy USB Support [Enabled]
Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to Auto allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
Port 64/60 Emulation [Enabled]
Allows you to enable or disable the Port 64/60 Emulation.Configuration
options: [Disabled] [Enabled].
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or
Full Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed]
BIOS EHCI Hand-Off [Enabled]
Allows you to enable or disable the BIOS EHCI hand-off support.
Configuration options: [Disabled] [Enabled]
2.4.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
CPU Configuration
Module Version:00.00
Physical Count: 1
Logical Count: 2
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
Revision: F2
Cache L1: 128KB
Cache L2: 2048KB
Speed : 2012MHz
Current FSB Multiplier: 10x
Maximum FSB Multiplier: 10x
Able to Change Freq. : Yes
uCode Patch Level: None Required
Runtime Legacy PSB [Disabled]
Cool N’Quiet [Enabled]
Runtime Legacy PSB [Disabled]
Allows you to enable or disable the Runtime Legacy PSB (performance
state blocks) feature necessary for implementing the AMD PowerNow!
technology. Configuration options: [Disabled] [Enabled]