Nikon WP-N3 - Manual (Page 67)

21
En
4 Soak the case in fresh water.
Reseal the case and leave it in a basin of fresh
water for two to three hours. Operate each
of the controls a few times to remove salt. If
salt drys on the controls, they may cease to
function or their metal parts may rust, caus-
ing the case to leak.
5 Wipe dry.
Dry the case thoroughly with a soft, dry cloth.
Do not use a cloth to which salt has adhered.
6 Let the case dry in the shade.
Leave the case out to dry in a shady, well-
ventilated area.
D Do Not Expose to Sunlight or Heat
Do not use a hair dryer or other heat source or place the case in direct sunlight. Heat could
cause the case or O-ring to deteriorate, resulting in leakage.
D Cleaning the Interior of the Case
Use a blower, brush, or a damp, soft cloth to remove foreign objects from the interior of the
case. Liquid can be removed with a damp, soft cloth. When using a cloth, be careful not to
scratch the case; do not use unnecessary force. Do not use water, detergents, or chemical
agents of any kind. Water can damage the coating on the inside of the lens window.