Spektrum SPMSR201 - Manual (Page 3)

EN
SR201 Instruction Manual
The Spektrum ™ SR201 2-channel DSM ® Sport Surface receiver is compat-
ible with all Spektrum surface transmitters and operates in DSM mode.
Specifications
Type: DSM Dimensions (LxWxH): 1.62 x 1.06 x .58 in (41 x 27 x 15mm)
Channels: 2 Weight: 0.36 oz (10 g)
Band: 2.4GHz Voltage Range: 3.5–9.6V
Antenna
LED
Throttle Port
Steering Port
Bind/Battery Port
Bind Plug
THR
STR
BIND
SR201
Receiver Connection and Installation
Install the Receiver in your vehicle using double-sided foam servo tape.
Foam servo tape will hold the receiver in place and help isolate it from
vibrations. Mount the antenna up and away from the vehicle in an antenna
tube. The higher up the antenna is, the better signal it will receive.
NOTICE: Do not cut the antenna.
Binding Receiver to Transmitter
In order to operate, the receiver must be bound to the transmitter. Binding
is the process of programming the receiver to recognize the GUID (Globally
Unique Identifier) code of a single specific transmitter. When a receiver is
bound to a transmitter/model memory, the receiver will only respond to
that specific transmitter/model memory.
Binding
1. With the receiver off, insert the bind plug into the BIND port in the
receiver.
2. Power the receiver through any port. If an ESC is being used, power
on the ESC with the ESC lead plugged in the throttle channel port. The
green LED will flash continuously, indicating that the receiver is in bind
mode.
Powering the receiver with a separate receiver pack
Receiver
Steering Servo
Throttle Servo
SR201
THR
STR
BIND
2.4Ghz DSM
SPORT SURFACE
RECEIVER
Battery