Spektrum SPMAR636 User Guide - Manual (Page 11)

EN
11
4. Q: Sometimes when I power on my DSM system I notice the
receiver won’t connect and it needs to be rebound to the
transmitter. Can this happen in flight?
A: No. A DSM receiver cannot be unbound from its transmitter without
specificaction by the user.
5. Q: How important is it that I test my system using a Spektrum
Flight Log?
A: All 2.4GHz signals, not just DSM, are affected by proximity to
conductive materials such as carbon fiber or metal. Few RTF and
ARF sport airplanes or helicopters use enough of these kinds of
materials for it to be an issue. If, however, you’re flying a sophisticated
model that uses a lot of conductive materials in its construction, a Flight
Log can be helpful. The information it collects when you fly will help you
determine the optimum location for your receiver(s) so you can minimize
the effects of these materials on your signal performance. For more
details on the Flight Log and how it works, visit SpektrumRC.com.