Spektrum SPM1300 - Manual (Page 8)

8 SPEKTRUM TELEMETRY
Clear Lap
Signal Lap # Lap Time
Speed/RPM Voltage Temperature
������������
��������������
The Clear Lap function erases the lap information
stored in the handheld unit's memory.
To access the clear laps screen press the  button
until Clear Laps appears on the screen, then press
the + or- button to clear the lap information.
Save Settings
Signal Lap # Lap Time
Speed/RPM Voltage Temperature
�������������
����������������
The Save Settings function stores all the programmed handheld
parameters such as temperature and voltage thresholds, the roll
out value, temperature units, etc. that you’ve programmed in the
handheld unit when it is turned off. If the Save Setting function is
not used, all of the parameters will default to their factory setting
each time the power is turned off on the handheld unit.
To access the Save Settings screen press the  button
until Save Settings appears on the screen, then press
the – or + button to save settings to memory.