Acer Altos G300 - Manual (Page 67)

55
IDE Configuration
Parameter Description Options
Primary IDE
Master Device detected as primary
IDE master. Manual configure IDE
device parameters if
device could not been
detected by BIOS.
Primary IDE
Slave Device detected as primary
IDE slave.
Secondary IDE
Master Device detected as secondary
IDE master.
Secondary IDE
Slave Device detected as secondary
IDE slave.
Third IDE
Master Device detected as third IDE
master.
Third IDE Slave Device detected as third IDE
slave.
Hard Disk
Write Protect Disable/Enable device write
protection. This will be
effective only if device is
accessed through BIOS. Disabled
Enabled
BIOS SETUP UTILITY
Advanced
IDE Configuration
___________________________________________________
Primary IDE Master [Hard Disk]
Primary IDE Slave [Hard Disk]
Secondary IDE Master [ATAPI CDROM]
Secondary IDE Slave [ATAPI CDROM]
Third IDE Master [Hard Disk]
Third IDE Slave [Hard Disk]
Hard Disk Write Protect [Disabled]
IDE Channel 3 mode [Native] Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 ©Copyright 1985-2000, American Megatrends Inc.
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.