Blodgett BCH-E - Manual (Page 8)

8
4.0 OPERATION INSTRUCTIONS
WARNING
The tilting braising pan and its parts are hot. Use care when operating,
cleaning and servicing the tilting braising pan.
BEFORE FIRST USE
Using a non-corrosive, grease-dissolving commercial cleaner, to clean the protective
metal oils from all surface parts and the interior of the tilting braising pan. Follow the
cleaner manufacturer‟s directions. Rinse thoroughly and drain the pan. Wipe dry with a
soft clean cloth.
CONTROLS:
TILT SWITCH -
Push up to raise tilting braising pan; push down to
lower tilting braising pan.
POWER SWITCH -
Turns power on to the lift motor. Note: it is not
necessary to have the power on when using the
braising pan. Turn power on only when you intend to
operate the tilt feature. This will save energy as well as
prevent the motor from overheating.
AMBER LIGHT -
Will light when the power is turned on to the lift motor.
THERMOSTAT-
Turns tilting braising pan ON and maintains set
temperature by controlling power supply. Temperature
settings range from 150

F (70

C) to 450

F (230

C).
RED TEMPERATURE LIGHT - Will light when heating elements are supplying heat to
the tilting braising pan.