Audiovox Rampage ACD16 - Manual (Page 6)

OPER OPER OPER OPER OPER A A A A AT TT TT ING INSTRUC ING INSTRUC ING INSTRUC ING INSTRUC ING INSTRUCT TT TT IONS IONS IONS IONS IONS
1
ON-OFF POWER BUTTON (PWR)
Press this button to turn the unit on or off. The
unit will also turn on automatically when a
compact disc is inserted if the ignition switch
is “on”.
2
VOLUME/LEVEL CONTROL
(VOL / VOL )
To increase the volume level, press the
volume up side of the control. The volume
will increase and the level will be shown on
the display panel from a minimum of
VOL 0 to a maximum of VOL 63. To
decrease the volume level, press the
volume down side of the control. The
display will automatically return to the normal
indication 5 seconds after the last volume
adjustment or when another function is
activated. This control is also used in
conjunction with the Select button
3
to
adjust the bass, treble, balance and fader
levels as described in
4
,
5
,
6
and
7
.
3
SELECT BUTTON (SEL)
This button is used to select the audio
function (volume, bass, treble, balance, or
fade) to be adjusted using the Level
control
2
. Pressing the Select button
once will set the unit for volume adjustment.
It is recommended that the volume level
control
2
be used. Pressing the Select
button twice will set the unit for bass
adjustment (BAS will appear on the display
panel). Pressing the button additional times
will select treble adjustment (TRE on the
display), balance (BAL), or fader (FAd).
The display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
4
BASS CONTROL
To adjust the bass level, first select the
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
5 5 5 5 5