Audiovox Rampage ACD16 User Manual

Page 12

SETSETSETSETSET

TTTTT

ING THE CLOCK / ERRING THE CLOCK / ERRING THE CLOCK / ERRING THE CLOCK / ERRING THE CLOCK / ERR

OR CODEOR CODEOR CODEOR CODEOR CODE

1. Switch the vehicle ignition and radio “on”.
2. Press the Time/Frequency button to call the time display.
3. Press and hold in the Time/Frequency Selector button

with the time displayed. The

time display will blink.

4. Press the VOL button to adjust the hours and AM/PM indication and VOL button

to adjust the minutes to the correct time.

5. Five seconds after the last hour or minute adjustment is made, the time will be set in

the unit and the display will return to the normal indication.

SET

SET T

TT ING THE CLOCK

ING THE CLOCK

CD PL

CD PL A

AYER ERR

YER ERR

YER ERROR CODES

OR CODES

ER-1: Indicates excessive temperature conditions at the CD changer. The error code

will go off and play will resume when the temperature at the changer returns to a
normal range.

ER-2: Indicates the disc is not loading or ejecting properly. Try re-loading or pressing

the Eject button. Check the condition of the disc in use or try another disc.

ER-3: Not user serviceable, contact an approved warranty station near you for

further assistance.

ER-4: Not user serviceable, contact an approved warranty station near you for

further assistance.

ER-5: Not user serviceable, contact an approved warranty station near you for

further assistance..

ER-6: Not user serviceable, contact an approved warranty station near you for

further assistance..

ER-7: Not user serviceable, contact an approved warranty station near you for

further assistance.

ER-8: Not user serviceable, contact an approved warranty station near you for

further assistance.

ER-9: Eject the disc, make sure it is clean, undamaged and loaded correctly (label

side up).

ER-10: Not user serviceable, contact an approved warranty station near you for

further assistance.

ER-11: Indicates that there is no magazine loaded in the CD Changer.