beautypg.com

Allied Telesis AT-FS238b/2 User Manual

Page 55

background image

AT-FS238a/x and AT-FS238b/x Series Installation Guide

45

1

RFI Emission

FCC Class B, EN55022 Class B,
VCCI Class B, C-TICK

2

Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.

3

Immunity

EN55024

4

Warning: This product requires shielded cables to comply with emission
and immunity standards. If it is used with unshielded cables, the user may
be required to take measures to correct the interference problem at their own
expense.

5

Electrical Safety

EN60950 (TUV), UL60950 (

c

UL

us

)

6

Laser

EN60825

Safety

7

Warning: Class 1 Laser product.

8

Warning: Do not stare into the Laser beam.

At time of installation, the Fiber Optic Lasers comply with FDA Radiation
Performance Standard 21CFR Subchapter J, applicable at date of
manufacture.

9

This is a “Class 1 LED Product”.

10

Electrical Notices
Warning
: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable
parts inside. This unit contains HAZARDOUS VOLTAGES and should only
be opened by a trained and qualified technician. To avoid the possibility of
ELECTRIC SHOCK, disconnect electric power to the product before
connecting or disconnecting the LAN cables.

11

Lightning Danger
Danger
: DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.

12

Caution: The power cord is used as a disconnection device. to de-energize
equipment, disconnect the power cord.

13

Pluggable equipment, the socket outlet shall be installed near the
equipment and shall be easily accessible.

14

Caution: Air vents must not be blocked and must have free access to the
room ambient air for cooling.

15

Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C.

16

All Countries: Install product in accordance with local and National
Electrical Codes.

17

Warning: Do not strip more than the recommended amount of wire.
Stripping more than the recommended amount can create a safety hazard by
leaving exposed wire on the terminal block after installation.

18

Warning: When installing this equipment, always ensure that the frame
ground connection is installed first and disconnected last.

This manual is related to the following products: