Allied Telesis AR300 SERIES ROUTER - Manual (Page 4)

4 AR300 Series Router
C613-04026-01 REVD
Package Contents
The following items are included with each AR300 Series router. Contact your
sales representative if any items are damaged or missing.
■ One AR300 Series router.
■ One AC power cord.
■ One terminal cable for connecting the router to a terminal or PC.
■ Two ISDN network cables.
■ One AR300 Series router Quick Install Guide.
■ One Safety and Statutory Information booklet.
■ One AR300 Series router Documentation and Tools CD-ROM (which
includes the complete AR300 Series Document Set, and utilities).
■ One warranty card.
Selecting a Site
The router should be installed on a level surface such as a desktop or bench.
When installing the router, choose a site that:
■ Allows adequate airflow around the router and its vents. Do not stack
routers directly on top of one another as this leaves insufficient room for
airflow.
■ Is free of dust and moisture.
■ Will allow the router to operate within a temperature range of 0 to 40º C (32
to 104º F) and a humidity range of 5 to 95% non-condensing.
■ Has a reliable and earthed (grounded), preferably dedicated and filtered,
power supply circuit.
■ Does not expose cabling to sources of electrical noise, such as radios,
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■ Allows easy access to the router’s power and cable connections.
Installing the Router
This equipment must be earthed.
Follow these steps to install the router:
1. Read the safety information
For safety information, see the Safety and Statutory Information booklet. A
copy of this booklet is supplied with each router, and can also be found on
the Documentation and Tools CD-ROM or at www.alliedtelesyn/
documentation/documentation.html.