Allied Telesis AT-WCP200G - Manual (Page 29)

AT-WCP200G User’s Guide
29
Configuration Tab
The Configuration tab allows you to configure Network and Security.
Under Network you can configure:
❑ Network Mode
Set Network Mode to “Infrastructure” when connecting to an
access point or set to “Ad-Hoc” if you have several stations and
want to set them as local network.
❑ Network SSID
The SSID differentiates one Wireless LAN group name from
another. All access points and all devices attempting to connect
to a specific Wireless LAN group name must use the same SSID. A
device will not be permitted to join the BSS unless it can provide
the unique SSID.