Allied Telesis AT-8500 Series Addendum - Manual (Page 2)

PN 613-50672-00 Rev A 2 Allied Telesyn, Inc.
Caution
The AT-8524POE Ethernet ports are only intended for installation
in Environment A as defined in IEEE 802.3af. All interconnected
equipment must be contained in the same building including the
interconnected equipment’s associated LAN connections.
Caution
The surface-mount fuses F1 to F24 on the Power over Ethernet
daughterboard in the AT-8524POE switch are 60V, max 2A fuses.
These fuses are not field-replaceable and should only be serviced
by a trained Allied Telesyn service technician.
Item #3:
This item applies to the AT-8524POE switch. The Note on page 51,
which describes the different methods for attaching the rackmount
brackets on the switch, should read as follows:
Note
The AT-8524POE switch supports only Method A.
Furthermore, the AT-8524POE switch comes with twelve screws for
mounting the brackets on the switch, while all other AT-8500 Series
switches come with eight screws.
Copyright
© 2004 Allied Telesyn, Inc. All rights reserved. No part of this publication may be
reproduced without prior written permission from Allied Telesyn, Inc.