Allied Telesis AT-VIEW PLUS 3.2 AMIGO - Manual (Page 10)

Allied Telesyn AT-VIEW PLUS
AMIGO
Example:
Amigo -TargetHost 172.16.18.34 -SetCommunity dvcmgrset
2.1.6 User Account Name
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a User
Account Name that is already configured on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword
PASS1233
2.1.7 Security Level
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a
Security Level that is configured for the User Account Name on the target host.
The available Security Levels are noAuthNoPriv, authNoPriv, and authPriv.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword
PASS1233
2.1.8 Authentication Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is
authNoPriv or authPriv, then you must specify an Authentication Protocol that is
configured for the User Account Name on the target host. The available
Authentication Protocols are MD5 and SHA.
PN 613-50662-00 Rev B Page 10 of 48