Allied Telesis AT-RPS9000 User Manual

Page 2

AT-RPS9000

STANDARDS: This product meets the following standards:

Category

Approval Agency and Requirement

Safety

UL60950-1
CAN/CSA-C22.2 No. 60950-1-03
EN60950-1

Electromagnetic Compliance

FCC CFR47 Part 15 Class A

EN55022 Class A
VCCI Class A
AS/NZS CISPR22 Class A

Immunity

EN55024
EN61000-3-2/3

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved by the manufacturer or the
FCC can void your right to operate this equipment.

Canadian Department of Communications

This Class A digital apparatus complies with ICES-003.

Cet appareil numérique de la classe A est conforme á la norme NMB-003 du Canada.

Safety

WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.

ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock , do not remove the cover. No user-serviceable parts inside.
This unit contains HAZARDOUS VOLTAGES and should only be opened by a trained and
qualified technician.

LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.

CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO
DE-ENERGIZE EQUIPMENT, disconnect the power cord.