Allied Telesis AT-CV81S - Manual

Overview
The AT-CV81S, see below, is a multi-protocol media converter that transports
Asynchronous Serial Data (with Hardware Flow control, CTS/RTS) from a
copper port, over a 100Base-FX fiber. It can be configured to support RS-232
or RS-422/485 serial data in Full duplex or Half duplex mode (available in
future release).
The AT-CV81S line card can be installed in either the AT-CV5000,
AT-CV1200, or AT-CV1000 chassis. This line card features one small form-
factor pluggable (SFP) transceiver slot, one console port (8-pin Mini-DIN) and
one serial port (9-pin Mini-DIN). The SFP slot can accommodate one SFP
transceiver that operates at a fixed operating speed of 100 megabits per
second (Mbps). The line card is hot-swappable into and out of the chassis.
1146
3K
1 2 3 4
SW 2
AT-CV8
1S
L/A
CPU RES ET
RDY
S
F
P
C
O
N
S
O
L
E
C
O
N
S
O
L
E
SER MODE SER ACT FD HD
RS-2 32 RS-4 22/485
Related Documents
This installation guide is an abbreviated version of the installation procedure.
For details on the components, features, and functions of this product, refer to
the following documents on our web site, www.alliedtelesis.com:
❑ AT-CV5000 Media Converter Chassis Installation Guide
PN 613-50580-00
❑ AT-CV1000 Media Converter Chassis Installation Guide
PN 613-50582-00
❑ AT-CV1200 Media Converter Chassis Installation Guide
PN 613-000331
❑ Converteon™ Media Converter Line Cards Reference Guide
PN 613-50581-00
❑ AT-S70 Management Software User’s Guide
PN 613-50617-00
Package Contents
Make sure the following items are included in the shipping package. If any
item is missing or damaged, contact your Allied Telesis sales representative
for assistance.
❑ One AT-CV81S Line Card
❑ One serial cable and one management cable
❑ This Installation Guide and Warranty Card
AT-CV81S Line Card Components
The AT-CV81S line card features the following components:
❑ One 100Base-FX SFP slot (SFP transceiver sold separately)
❑ One RS-232 serial local console interface with 8-pin Mini-DIN connector
❑ One RS-232/422/485 full-duplex serial port with 9-pin Mini-DIN connector
and port slide switches
❑ One push button for local CPU reset
❑ One DIP switch
❑ LEDs
3K
1 2 3 4
SW 2
3K
1 2 3 4
SW2
AT-CV8
1S
L/A
CPU R ESET
RDY
S
F
P
C
O
N
S
O
L
E
C
O
N
S
O
L
E
SER MODE SER ACT FD
HD
RS-232 RS-422/485
1147
SFP Expansion Slot
SFP Transceiver LED
Serial Data Port LEDs
Interface DIP Switch
CPU Reset Button
Console Port
Serial Data Port
Console Port LED
Port Slide Switches
Note
Local Console port and Half Duplex mode are not available in the current
AT-S70 V1.5 software release.
Features
The serial port supports RS-232/422/485 serial data transport over fiber.
SFP Slot, Local Console Port, and Serial Port
The AT-CV81S line card features one 100Base-FX SFP slot, one RS-232
local console port, and one RS-232/422/485 serial port with slide switches.
The SFP slot will accept one SFP transceiver that operates at a fixed
operating speed of 100 Mbps.
Laser
Class 1 laser product.
Laser
Do not stare into the laser beam.
LEDs
The following table lists the line card status and basic alarms LED’s.
LED Color Description
RDY Green The line card has passed diagnostics.
OFF The line card has not passed diagnostics.
L/A Green The twisted pair port has established a valid link
Blinking
Green The twisted pair port has detected TX/RX
activity.
CONSOLE
(applies to
AT-CV5000
chassis only) Green The line card is managed from its local console.
OFF The line card is managed from the CPM module
located in the rear of the chassis.
SER MODE Green The serial port is operating in RS-232 mode.
Yellow The serial port is operating in RS-422/485
mode.
SER ACT Blinking
Green The serial data port has detected TX/RX activity
in full-duplex mode.
Blinking
Yellow The serial data port has detected TX/RX activity
in half-duplex mode (available in future release).
OFF No activity detected on the serial data port.
CONVERTEON™ Family
AT-CV81S Media Converter Line Card
Installation Guide
Allied Telesis, Inc.
www.alliedtelesis.com
2 3 613-000566 Rev A 1
*613-000566 Rev A*